How To Use A Nectar Collector In 7 Simple Steps + Bonus Review

NECTAR-COLLECTORNectar collectors for the most part, have only been around for the past year or so, but are starting to gain popularity as more and more  people discover this new dynamic method of vaporizing dabs. This new style of dabbing, takes user experience to the next level, by offering a unique vertical vaporizing process that allows  you to gauge your dab intake perfectly every time, without having to worry about excess concentrates being wasted during your hits.

Most nectar collectors on the market today are relatively expensive, ranging in price from $100, of upwards to $1,000, depending on what brand name you buy and which dab accessories come with them. If you’re lucky, you might come across a low priced, yet highly effective nectar collector from an online wholesale smoke shop, but for the most part, they tend to be on the costly side.

nectar collector kit

At first glance, the nectar collector looks like a probing device from an alien spaceship. The glass body is shaped like a syringe and usually features an embedded percolator, that can be used as a filtration device when water is applied. Accompanying the base are a glass mouthpiece that slides into the top, and a nectar collector titanium tip, that is used unconventionally, as a dab nail. Some nectar collector kits also come equipped with a wax dish, such as this one, that is used as a launch pad, for inserting the titanium tip into finely extracted medical concentrates upon inhalation. The more high end nectar collectors typically come with a rotating metal pivoting stand, that assists in the vertical vaporizing process, once inserted into dabs.

How to Use A Nectar Collector In 7 Simple Steps

             

Step 1: Add Water to the Base

Tip #1: Fill the base slowly with water, making sure that it filled about halfway, allowing for the best percolation.

Tip #2: Make sure that the glass mouthpiece and titanium tip are removed before filling with water so that water won’t get trapped in the tip.

pour water nectar collector

Step 2: Check Water Level

Tip: Make sure water level is a little less than half-way full to allow for optimal percolation.

nectar collector water level

 Step 3: Add Glass Mouthpiece to Base

Tip: A small amount of joint wax can be applied to the base in order to prevent the mouthpiece from sliding in place during use.

nectar collector mouth piece

Step 4: Add Nectar Collector Titanium Tip to Base

Tip: Joint wax can be applied as a faint adhesive to the inside of the tip after being heated with a torch, to keep it in place during use.

nectar collector tip

 Assembled Nectar Collector

nectar collector assembled

(Ready for take-off)*

Step 5: Heat Titanium Tip Gently With Butane Torch Until It Has A Light Red Glow

Tip #1: Be careful not to overheat the tip as excessive heating can cause cracking.

Tip #2: Hold the nectar collector horizontally while heating to avoid leaks.nectar collector titanium

(Don’t Be A Dumbass and Burn Yourself or Your Friends!)

Step 6: Inhale While Tip Is Heated, and Submerge Tip in Dabs

heated tip

 (The kit that we purchased came with a glass wax dish)

Tip: The nectar collector titanium tip allows you to use just the amount of dabs needed for your hit, so don’t waste your supply!

Step 7: Don’t Forget to Exhale!

exhale nectar collector

6″ Mini Nectar Collector 10mm Review

Besides the titanium tip and glass mouthpiece, this nectar collector kit features a wax dish for storing dabs in between hits.The nectar collector itself, is 6 inches in length and has a 10mm sized titanium nail. The design is sleek and clean in appearance, and is made with durable borosilicate glass, which is known for it’s high resistance to extreme heat. The only downside to using this piece is the fact that it doesn’t come with a rotating metal swivel stand, as some of the more high end nectar collectors have, but that aside, this piece does it all. While using this device we experienced no issues during the assembly process and the hits were very clean and filtered thanks to the mini percolator. We filled the water too high the first time, but it was an easy fix. All in all, this nectar collector gets the job done at a fraction of the price that you’d normally pay for your average nectar collector, and it makes for an ideal buy, especially if you’re into dabbing or simply want a cheap alternative to your every day dab rig.

The nectar collector featured in this review: http://www.marijuanapackaging.com/6-nectar-collector-10mm.html

13 thoughts on “How To Use A Nectar Collector In 7 Simple Steps + Bonus Review

    • The thing that sucks about this one in particular is if you aren’t ready and have the top more than one inch away from the dabs, it cools down so fast you won’t get a big enough hit. It’s almost impossible to score a huge choker hit with this titanium tip. I swapped it out for a quartz tip and that’s when the magic happened. The quarts tip kept the red hot tip much longer and didn’t spread up to the glass of the pipe.. With the stock tip I would rate this collector at a 4 out of 10. It almost creates stress since you gotta be buried in the pruduct before u release the flame from torch. Otherwise you get a bunk hit

      Like

  1. I purchased this exact item from this exact vendor before I found this article…must agree 100% with this review…
    It’s a great product at the best price I could find anywhere!

    Like

  2. I can’t get my nail out of my necter straw.too much WAx.do you have any suggestions?I’ve tried heating it up and rubbing alcohol.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s