How To Use A Nectar Collector In 7 Simple Steps + Bonus Review

NECTAR-COLLECTORNectar collectors for the most part, have only been around for the past year or so, but are starting to gain popularity as more and more  people discover this new dynamic method of vaporizing dabs. This new style of dabbing, takes user experience to the next level, by offering a unique vertical vaporizing process that allows  you to gauge your dab intake perfectly every time, without having to worry about excess concentrates being wasted during your hits.

Most nectar collectors on the market today are relatively expensive, ranging in price from $100, of upwards to $1,000, depending on what brand name you buy and which dab accessories come with them. If you’re lucky, you might come across a low priced, yet highly effective nectar collector from an online wholesale smoke shop, but for the most part, they tend to be on the costly side.

nectar collector kit

At first glance, the nectar collector looks like a probing device from an alien spaceship. The glass body is shaped like a syringe and usually features an embedded percolator, that can be used as a filtration device when water is applied. Accompanying the base are a glass mouthpiece that slides into the top, and a nectar collector titanium tip, that is used unconventionally, as a dab nail. Some nectar collector kits also come equipped with a wax dish, such as this one, that is used as a launch pad, for inserting the titanium tip into finely extracted medical concentrates upon inhalation. The more high end nectar collectors typically come with a rotating metal pivoting stand, that assists in the vertical vaporizing process, once inserted into dabs.

How to Use A Nectar Collector In 7 Simple Steps

             

Step 1: Add Water to the Base

Tip #1: Fill the base slowly with water, making sure that it filled about halfway, allowing for the best percolation.

Tip #2: Make sure that the glass mouthpiece and titanium tip are removed before filling with water so that water won’t get trapped in the tip.

pour water nectar collector

Step 2: Check Water Level

Tip: Make sure water level is a little less than half-way full to allow for optimal percolation.

nectar collector water level

 Step 3: Add Glass Mouthpiece to Base

Tip: A small amount of joint wax can be applied to the base in order to prevent the mouthpiece from sliding in place during use.

nectar collector mouth piece

Step 4: Add Nectar Collector Titanium Tip to Base

Tip: Joint wax can be applied as a faint adhesive to the inside of the tip after being heated with a torch, to keep it in place during use.

nectar collector tip

 Assembled Nectar Collector

nectar collector assembled

(Ready for take-off)*

Step 5: Heat Titanium Tip Gently With Butane Torch Until It Has A Light Red Glow

Tip #1: Be careful not to overheat the tip as excessive heating can cause cracking.

Tip #2: Hold the nectar collector horizontally while heating to avoid leaks.nectar collector titanium

(Don’t Be A Dumbass and Burn Yourself or Your Friends!)

Step 6: Inhale While Tip Is Heated, and Submerge Tip in Dabs

heated tip

 (The kit that we purchased came with a glass wax dish)

Tip: The nectar collector titanium tip allows you to use just the amount of dabs needed for your hit, so don’t waste your supply!

Step 7: Don’t Forget to Exhale!

exhale nectar collector

6″ Mini Nectar Collector 10mm Review

Besides the titanium tip and glass mouthpiece, this nectar collector kit features a wax dish for storing dabs in between hits.The nectar collector itself, is 6 inches in length and has a 10mm sized titanium nail. The design is sleek and clean in appearance, and is made with durable borosilicate glass, which is known for it’s high resistance to extreme heat. The only downside to using this piece is the fact that it doesn’t come with a rotating metal swivel stand, as some of the more high end nectar collectors have, but that aside, this piece does it all. While using this device we experienced no issues during the assembly process and the hits were very clean and filtered thanks to the mini percolator. We filled the water too high the first time, but it was an easy fix. All in all, this nectar collector gets the job done at a fraction of the price that you’d normally pay for your average nectar collector, and it makes for an ideal buy, especially if you’re into dabbing or simply want a cheap alternative to your every day dab rig.

The nectar collector featured in this review: http://www.marijuanapackaging.com/6-nectar-collector-10mm.html

Your First Dab Rig: What You Should Know Before You Buy

your first dab rigSo you’ve taken a few dabs and decided you want a setup of your own– welcome to the wonderful world of dabbing! Just as concentrates have evolved over the last few years, so too have the pieces with which to enjoy them and the sheer number of options available can be intimidating if you’ve never owned a rig before. In this article, we’ll explain the basic mechanics behind dabbing and arm you with all the knowledge you need to enjoy picking a dab rig that will serve you well for years to come. Let’s get started!

The Basicsdomeless-titanium-nail-oil-rigjpg

Your standard dab rig these days will consist of three parts: a glass piece, a heating element (called a nail), and a torch lighter with which to heat your nail. When done properly, dabbing is more akin to vaping than smoking because very little of your concentrate actually combusts. As a result, many of the characteristics that make a piece good for smoking make it a poor choice for dabbing. As opposed to cooling smoke, cooling vapor causes it to condense back into liquid form which leaves you with an abundance of “reclaim oil” along the sides of your piece– while still potent to a significant degree, reclaim is unpleasant to dab and many people dispose of it. To avoid this, the ideal rig is small and has minimal diffusion to allow most of the vapor to enter your lungs.

Bonus: small simple dab rigs also tend to be cheaper… economic and efficient. But before you go choosing your piece, you need to think about the most important part of your rig– the heating element aka the nail.

The Nail

At the heart of your dab rig is the nail; it sits on your piece and after heating it with your torch, it heats your concentrate above the point of vaporization. Depending on your preferences, you have four choices of material: quartz (fused silica), glass (borosilicate), ceramic, and titanium. While there is plenty of anecdotal evidence floating around the internet, the science behind these materials is well understood. The truth is, your choice of material will have minimal, if any, effect on flavor. Rather, the material will affect how hot your nail gets and how long it stays hot.

As a chemist and experienced glass-blower, it’s hard for me to recommend a glass (borosilicate) nail since it doesn’t retain heat well and is guaranteed to break at some point– sometimes by shooting a hot chunk directly in your direction. The coefficient of thermal expansion on ceramic nails also means they too will break eventually, though they’re more likely to do so in a less dramatic fashion. The leaves two real options: quartz and titanium.

Titanium vs. Quartz

quartz and titanium nailYou can’t go wrong with either and it all comes down to preference. When picking your first rig, I recommend getting a Ti nail because they’re impossible to break and they stay hot for longer. The problem with Ti nails is that they can be overheated to the point that they start to burn some of your concentrate. Even when this does happen, the combustion is still minimal compared to smoking but this is why its a good idea to pick a rig with just a little water diffusion. Some people have suggested that you can overheat your nail to the point of generating toxic levels of Titanium oxide but rest assured– the nail would need to be a white hot 2,100°F… 500 degrees above the point at which your borosilicate glass piece will begin to melt into a flaming pool on your coffee table– don’t worry about it.

While it’s nearly impossible to overheat a quartz nail, they do cool down quickly which can lead to taking cool hits where you essentially melt the concentrate without vaporizing much of it. It’s as frustrating and disappointing a way to waste your expensive concentrate and as a result, I tend to recommend sticking to a Ti nail until you’ve become more comfortable with setting up and operating your rig.

Dome vs. Domeless

It might seem counterintuitive but I recommend you get a domed Ti nail for your first dab rig. The Ti nail gets up to around 800°F and when you’re really, really stoned, it’s nice to have something protecting your hand (or other things) from accidentally touching your hot nail. Domed nails are also smaller which allow for less heating time.

Torch

You’re going to need torch to heat your nail and that torch should use no fuel other than butane. Propane gets too hot too fast and is just generally a bad thing to keep around the house. You can go to home depot and grab something in the pluming section but I recommend getting a smaller torch with a more manageable flame so you don’t end up heating up the glass on your piece too… which leads to another good point: choose a piece that gives you room to heat your nail (you want the nail to extend out an inch or two). If you find yourself too intimidated by the torch, you’re not out of options! You might consider getting a pen vape or an e-nail.

To Each Her Own

While I recommend a small water pipe with a domed Ti nail as the ideal first dab rig, it ultimately comes down to personal preference and by all means if you enjoyed your experience using a different rig, you should do what makes you happy! There’s no wrong answer when it comes to what you like.